您的瀏覽器不支援內置框架或目前的設定為不顯示內置框架。
GAM 980 Hole Inspector for Printed Circuit Boards
Windows interface :Easy to learn.
Adjust the inspection speed based on needs.
Set up the inspection & non-inspection area.
Set up the hole diameter on needs.
Unique Image Processing Technology :High Inspection Reliability.
Can tolerate the ±30 degrees deviation of the standby plate.
Compare with PCB or CAM standard.
Fully auto focusing function.
Unique function can reduce the error percentage.
The base board can rotate 8 directions.
【Application】
Finished board inspection.
Bare Copper Board Inspection after drilling.
Match the SPC statistic data sheet.
Can measure the flexible pc boards (available under 0.15mm)
【Option】
Loader.
Tube.
Illumination meter.
【Inspection Items】
Inspect standard board hole quantity.
Inspect test board hole quantity.
Inspect defective hole quantity.
Inspect good hole quantity.
Inspect surplus hole quantity.
Inspect lack hole quqntity.
Inspect of hole diameter.
Bits of solder/copper.
【Inspection Standard Setting】
Windows interface:Easy Operation.
Set up the tolerances of difference shape of hole.
【Display Drill's diameter position】
Display Drill's size and position.
Convenient to save data with complete file format.
【Analysis form of Drill's Diameter】
Display the analysis form of drill's diameter.
Index for improving processing and quality.
【Auto focusing function】
Enter the thickness value of PC boards and software will auto focus.
The software will auto detect the PC boards thickness and focus.
【Inspection parameters setting】
Circular hole, deficient hole and board side shaping inspections are selectable.
【Authority setting】
System opens distinct functions base on different password.
【Language & Unit setting】
Language and unit are selectable.
【Color Display】
Different hole shape be displayed by different color.
n.
【Editor】
Flexible operation interface.
Could be inspection by special hole shape.
Could be inspection by part range.
Could be set to inspect one hole.
【Assistant image window】
Selection and hole on master window then clicks it after that the holes imagination will display to assist you identify defect condition.
【Data Report】
List the result of defective hole for user could control quality prompt.
【Specification】
Item
GAM980
Inspection method
CCD IMAGE SENSOR
CCD dpi
1200 dpi
Board Size
110*130mm(Min),600*600mm(Max
Board Thickness
0.1 ~ 7mm(0.2 needs the jig)
Hole diameter
≧0.1mm(conveyer speed 2.5M/min
Max. quantity of inspection
≧400,000
Inspect speed
2.5、5、7.5、10、12.5m/min
Max. Slanting angle
30°
Focusing function
Auto Focusing
Light source
LED
Accuracy
±15um
Voltage
AC 220V、Single50/60Hz、1.5KVA
Dimension
3850(L)*1040(H)*1190(H) mm
Weights
1490 Kg
Air demand
7kg
System
Windows XP
【View】
Above View
Front View
Lateral View
(Unit:mm)